ProLine Push-Out Test Stand

The ProLine Push-Out Test Stand, also known as a push tester, checks the strength of sample welds to help fabricators ensure the quality of finished products.

Purchase the Push-Out Test Stand Online at

The ProLine system uses a hand-operated pump to exert up to 5,000 lbs. (2,250 kg) of force on weld nuts and studs. It measures force at the point of weld failure, or in a non-destructive mode. (Left: The standard 5,000 lbs. Push Out Test Stand with hand-operated hydraulic jack.)

Quality assurance doesn’t take up much space — The test stand has a small footprint, only 8″x18″x27″ (WxDxH) and weighs approximately 150 lbs. The steel stand and hand-operated jack are painted to resist corrosion.

The optional Quick Kit Adapter set (pictured left, below) help ensure test repeatability, while allowing for easy switching between tested fastener sizes.

For help diagnosing weld quality causes and issues, see our WeldHelp Resistance Welding Troubleshooting Guide. To request a quote on the Push Out Test Stand, use the form at right, or contact us at


This contact form is deactivated because you refused to accept Google reCaptcha service which is necessary to validate any messages sent by the form.