Cause: Weld Force Low

The interfacial welding force is less than that required by the applicable specification.

Description 

Weld force brings the metal between the electrodes together and provides electrical continuity, the required welding pressure, and forging force, so that a weld may be generated. The lower the force, the higher the interfacial resistances, resulting in higher heat generation at the tip to sheet and sheet to sheet interfaces.

On a microscopic scale, the surfaces of electrodes and workpieces consist of peaks and valleys. When subjected to low force, the metal-to-metal contact will be only at the contacting peaks. The resulting contact area is less than that produced by an appropriate force. Contact resistance will therefore be higher, causing a greater amount of heat to be generated.

Measured weld force: That value of weld force set, for example, using a force gage, before the workpiece is introduced.

Interfacial weld force: That force actually present at the sheet to sheet interface. This is equal to the measured weld force minus the force required to overcome poor fit up.

Detection 

The condition may be indicated by:

Significance 

Quality, Workplace Issues, Cost, Downtime, Maintenance, Throughput (cycle time; PPH), are all potentially affected by this condition.

Subordinate Causes

Contact Us

Related Products
Force Gauge